UREC Industries

Static Discharge Pole is a device used to safely discharge static electricity from an object or surface. Static electricity can accumulate on objects due to friction, and if not properly discharged, can lead to electrostatic discharge (ESD) events that can damage sensitive electronic components.

A Static Discharge Pole typically consists of a long, insulated pole with a conductive tip or cable at the end. The conductive tip or cable is used to make contact with the object or surface to be discharged, allowing the static charge to safely dissipate.

Application:
Used in EPA (ESD protected area), paint manufacturing industries, gas station unloading ports, self-service gas stations, automatic tankers, oil depots, warehouses, factory workshop entrances, railway oil platforms, tank escalators, tank entrances, pump rooms, etc.

Particulars:

• Model: UREC-DP02
• Height: 1000mm
• Digital Display: N/A
• Alarm Function: Yes
• Touch Ball Diameter: 90mm
• Pole Diameter: 50mm
• Pole Wall Thickness: 2mm
• Mounting Flange Diameter: 230mm
• Ground Cable Length: 2 meters
• Human Body Electrostatic: Less than 20kV
• Working Temperature: 40-60 degrees Celsius
• Human Body Voltage: Less than 100V
• Maximum Current Release: Less than 2mA
• Electrostatic Release Time: Less than 100ms
• Power Source: 3.6V DV lithium battery
• Rod Material: SS304
• Ground Resistance: ≤55Ω
• Explosion Proof: Yes

Application:
Used in EPA (ESD protected area), paint manufacturing industries, gas station unloading ports, self-service gas stations, automatic tankers, oil depots, warehouses, factory workshop entrances, railway oil platforms, tank escalators, tank entrances, pump rooms, etc.

Particulars:

• Model: UREC-DP03
• Height: 1000mm
• Digital Display: Yes
• Alarm Function: Yes
• Touch Ball Diameter: 90mm
• Pole Diameter: 50mm
• Pole Wall Thickness: 2mm
• Mounting Flange Diameter: 230mm
• Ground Cable Length: 2 meters
• Human Body Electrostatic: Less than 20kV
• Working Temperature: 40-60 degrees Celsius
• Human Body Voltage: Less than 100V
• Maximum Current Release: Less than 2mA
• Electrostatic Release Time: Less than 100ms
• Power Source: 3.6V DV lithium battery
• Rod Material: SS304
• Ground Resistance: ≤55Ω
• Explosion Proof: Yes

Application:
Used in EPA (ESD protected area), paint manufacturing industries, gas station unloading ports, self-service gas stations, automatic tankers, oil depots, warehouses, factory workshop entrances, railway oil platforms, tank escalators, tank entrances, pump rooms, etc.

Particulars:

• Model: UREC-DP01
• Height: 1000mm
• Digital Display: N/A
• Alarm Function: N/A
• Touch Ball Diameter: 90mm
• Pole Diameter: 50mm
• Pole Wall Thickness: 2mm
• Mounting Flange Diameter: 230mm
• Ground Cable Length: 2 meters
• Human Body Electrostatic: Less than 20kV
• Working Temperature: 40-60 degrees Celsius
• Human Body Voltage: Less than 100V
• Maximum Current Release: Less than 2mA
• Electrostatic Release Time: Less than 100ms
• Power Source: N/A
• Rod Material: SS304
• Ground Resistance: ≤55Ω
• Explosion Proof: Yes

Surface Resistivity Meter is an instrument used to measure the surface resistivity of materials. The surface resistivity is the electrical resistance of a material's surface, which is a measure of the ability of the material to conduct or resist the flow of electricity across its surface.

Surface resistivity meters are commonly used in industries such as electronics, packaging, and manufacturing, where it is important to measure the electrical properties of materials used in various applications. These meters typically use a four-point probe method to measure the surface resistivity, which involves applying a known voltage to the material and measuring the resulting current.

Surface resistivity meters can be used to measure the surface resistivity of a wide range of materials, including plastics, films, coatings, fabrics, and conductive materials such as metals and carbon fibers. They can also be used to measure the surface resistivity of materials under different environmental conditions, such as temperature and humidity.

Surface Resistivity Meter is an instrument used to measure the surface resistivity of materials. The surface resistivity is the electrical resistance of a material's surface, which is a measure of the ability of the material to conduct or resist the flow of electricity across its surface.

Surface resistivity meters are commonly used in industries such as electronics, packaging, and manufacturing, where it is important to measure the electrical properties of materials used in various applications. These meters typically use a four-point probe method to measure the surface resistivity, which involves applying a known voltage to the material and measuring the resulting current.

Surface resistivity meters can be used to measure the surface resistivity of a wide range of materials, including plastics, films, coatings, fabrics, and conductive materials such as metals and carbon fibers. They can also be used to measure the surface resistivity of materials under different environmental conditions, such as temperature and humidity.

Static Charge Meter is an instrument that measures the level of static charge on an object or surface. Static charge is a buildup of electric charge on a surface, which can occur due to friction or other factors.

Static Charge Meter Manufacturer, Supplier and Exporter base in New Delhi, India

Digital Static Charge Meter Manufacturer, Supplier and Exporter base in New Delhi, India

Static Charge Meter Digital Manufacturer, Supplier and Exporter base in New Delhi, India

ESD (electrostatic discharge) wrist strap and footwear tester is a device used to test the functionality of both an ESD wrist strap and ESD footwear, which are worn by personnel to prevent electrostatic discharge from damaging sensitive electronic equipment during handling or assembly.

The ESD wrist strap and footwear tester typically consists of a small handheld device with a connector for attaching the wrist strap and a metal plate or mat for testing ESD footwear. The device generates a small amount of current to test the grounding of the wrist strap and the conductivity of the footwear.

The wrist strap and footwear tester is an important tool in an ESD control program, as it helps to ensure that personnel are properly grounded and wearing properly functioning ESD wrist straps and footwear. This is especially important in environments where electronic components are being assembled or repaired, as even a small amount of electrostatic discharge can cause damage to sensitive electronic equipment.

Static Charge Meter is an instrument that measures the level of static charge on an object or surface. Static charge is a buildup of electric charge on a surface, which can occur due to friction or other factors.

Static Charge Meter Manufacturer, Supplier and Exporter base in New Delhi, India

Digital Static Charge Meter Manufacturer, Supplier and Exporter base in New Delhi, India

Static Charge Meter Digital Manufacturer, Supplier and Exporter base in New Delhi, India

combo tester for ESD (electrostatic discharge) wrist strap and footwear is a device that combines the functionality of the ESD wrist strap tester and ESD footwear tester into a single device.

The combo tester typically has two connectors, one for testing the wrist strap and one for testing the ESD footwear. The device generates a small amount of current to test the grounding of the wrist strap and the conductivity of the footwear.

Using a combo tester for ESD wrist strap and footwear is an efficient and convenient way to ensure that personnel are properly grounded and wearing properly functioning ESD wrist straps and footwear. This is especially important in environments where electronic components are being assembled or repaired, as even a small amount of electrostatic discharge can cause damage to sensitive electronic equipment.

combo tester for ESD (electrostatic discharge) wrist strap and footwear is a device that combines the functionality of the ESD wrist strap tester and ESD footwear tester into a single device.

The combo tester typically has two connectors, one for testing the wrist strap and one for testing the ESD footwear. The device generates a small amount of current to test the grounding of the wrist strap and the conductivity of the footwear.

Using a combo tester for ESD wrist strap and footwear is an efficient and convenient way to ensure that personnel are properly grounded and wearing properly functioning ESD wrist straps and footwear. This is especially important in environments where electronic components are being assembled or repaired, as even a small amount of electrostatic discharge can cause damage to sensitive electronic equipment.

combo tester for ESD (electrostatic discharge) wrist strap and footwear is a device that combines the functionality of the ESD wrist strap tester and ESD footwear tester into a single device.

The combo tester typically has two connectors, one for testing the wrist strap and one for testing the ESD footwear. The device generates a small amount of current to test the grounding of the wrist strap and the conductivity of the footwear.

Using a combo tester for ESD wrist strap and footwear is an efficient and convenient way to ensure that personnel are properly grounded and wearing properly functioning ESD wrist straps and footwear. This is especially important in environments where electronic components are being assembled or repaired, as even a small amount of electrostatic discharge can cause damage to sensitive electronic equipment.

Product Specification Product Description

Features:
Complete with precision and energy-saving operational amplifier for comparison and calculation.
Measurement surface resistivity and grounding resistance.
Small size, light weight, and less power consumption.
Compact size for convenient carrying.

Products Specification:
Brand                                      :           DR.SCHNEIDER
Model                                     :           DS-LS-385
Range of Measurement           :           10^3--10^12 Ohms

Static Charge Meter is an instrument that measures the level of static charge on an object or surface. Static charge is a buildup of electric charge on a surface, which can occur due to friction or other factors.

Static Charge Meter Manufacturer, Supplier and Exporter base in New Delhi, India

Digital Static Charge Meter Manufacturer, Supplier and Exporter base in New Delhi, India

Static Charge Meter Digital Manufacturer, Supplier and Exporter base in New Delhi, India

Our ESD Wrist Strap Footwear Tester is a revolutionary device designed to measure and verify the effectiveness of ESD wrist straps and footwear worn by personnel working in Electrostatic Protected Areas (EPAs). With this indispensable tool, you can ensure that static charges are effectively dissipated, significantly reducing the risk of costly ESD-related damage to your critical equipment.

 

Why choose our ESD Wrist Strap Footwear Tester? First and foremost, our device is engineered with cutting-edge technology and precision to deliver accurate and consistent results, providing you with the utmost confidence in your ESD protection measures.

 

Enhance your workplace safety and productivity with regular testing and certification of ESD wrist straps and footwear. Compliant with industry standards, our ESD Wrist Strap Footwear Tester guarantees that your workforce is operating within safe ESD limits.

 

Don't compromise on quality or risk ESD damage; trust our ESD Wrist Strap Footwear Tester for robust and reliable ESD protection. Invest in a secure future for your business and reputation. Contact us today to explore the world of electrostatic safety and empower your workforce with the best-in-class ESD Wrist Strap Footwear Tester.

Surface Resistivity Meter is an instrument used to measure the surface resistivity of materials. The surface resistivity is the electrical resistance of a material's surface, which is a measure of the ability of the material to conduct or resist the flow of electricity across its surface.

Surface resistivity meters are commonly used in industries such as electronics, packaging, and manufacturing, where it is important to measure the electrical properties of materials used in various applications. These meters typically use a four-point probe method to measure the surface resistivity, which involves applying a known voltage to the material and measuring the resulting current.

Surface resistivity meters can be used to measure the surface resistivity of a wide range of materials, including plastics, films, coatings, fabrics, and conductive materials such as metals and carbon fibers. They can also be used to measure the surface resistivity of materials under different environmental conditions, such as temperature and humidity.

ESD (electrostatic discharge) wrist strap and footwear tester is a device used to test the functionality of both an ESD wrist strap and ESD footwear, which are worn by personnel to prevent electrostatic discharge from damaging sensitive electronic equipment during handling or assembly.

The ESD wrist strap and footwear tester typically consists of a small handheld device with a connector for attaching the wrist strap and a metal plate or mat for testing ESD footwear. The device generates a small amount of current to test the grounding of the wrist strap and the conductivity of the footwear.

The wrist strap and footwear tester is an important tool in an ESD control program, as it helps to ensure that personnel are properly grounded and wearing properly functioning ESD wrist straps and footwear. This is especially important in environments where electronic components are being assembled or repaired, as even a small amount of electrostatic discharge can cause damage to sensitive electronic equipment.

combo tester for ESD (electrostatic discharge) wrist strap and footwear is a device that combines the functionality of the ESD wrist strap tester and ESD footwear tester into a single device.

The combo tester typically has two connectors, one for testing the wrist strap and one for testing the ESD footwear. The device generates a small amount of current to test the grounding of the wrist strap and the conductivity of the footwear.

Using a combo tester for ESD wrist strap and footwear is an efficient and convenient way to ensure that personnel are properly grounded and wearing properly functioning ESD wrist straps and footwear. This is especially important in environments where electronic components are being assembled or repaired, as even a small amount of electrostatic discharge can cause damage to sensitive electronic equipment.

ESD (electrostatic discharge) wrist strap tester is a device used to test the functionality of an ESD wrist strap, which is a device worn on the wrist to prevent electrostatic discharge from damaging sensitive electronic equipment during handling or assembly.

The ESD wrist strap tester typically consists of a small handheld device with a clip or connector for attaching the wrist strap, and a series of LED lights or an LCD screen to indicate whether the wrist strap is functioning properly. When the wrist strap is connected to the tester, a small amount of current is passed through it to ensure that it is properly grounded and capable of dissipating static electricity.

Using an ESD wrist strap tester is an important part of any ESD control program, as it helps to ensure that personnel are using properly functioning wrist straps and that sensitive electronic equipment is protected from damage due to electrostatic discharge.

Product Specification Product DescriptionRange: 0-12.7mm/0.5"Resolution: 0.01mm/0.0005Accuracy: +/-0.02mmLarge, easy-to-read LCDZero setting at any position,mm/inch conversion
Manual ON/OFF or automatic power offPower: One 1.55v battery

This quipment is developed to measure the resistivity of paints, varnishes and liquids in a fast and precise way. Indispensable for the correct functioning of electrostatic paint installations. It helps saving paint and reducing paint waste.


Easy to use Switch on the equipment, and introduce the probe into the paint Press measuring bottom “ START ”, and after 10 secons aprox the resistivity value is in the display The equipment has an inside Autoescaling, which allow to measure all range of resistivity without changing the reading procedure. 

Fluke 101 Digital MultimeterDesigned for basic electrical tests, the Fluke 101 digital multimeter offers reliable measurements for residential/commercial electricians and heating and air conditioning technicians. This small, lightweight multimeter fits comfortably in your hand but is rugged enough to withstand daily use for years to come.